The
tapestries we provide, are just with lining and without any rod pockets or accessories
by default. They are then hanged generally on wall with the help of tapestry clips
on the tapestry rods or also nailed on the walls. However we do provide various
other customization for the tapestries you buy from us at an extra cost only if
specifically instructed. Different ways how most of your tapestries shown on this
website can be customised. 1.
Extension Loops: The extension loops are the extended lining cloth of the
tapestry inside which the tapestry rod can be inserted. The extension loops can
be on either one of the 4 sides. The size of the loops is excluding the size of
the tapestry mentioned by default (i.e if the tapestry you chose is of 40x60"
size then the loops will be an additional size to that tapestry). You can opt
for the 2 sub options below. (a) Extension loops on any ONE LONGER side.
(5-6 in number per tapestry) [Exra cost: US$3.00 per tapestry] (b) Extension
loops on any ONE SHORTER side. (4-5 in number per tapestry) [Exra cost: US$2.50
per tapestry] | 2.
Extended lining rod insert pocket: Here the lining cloth (piping) is extended
further to create a suitable passage for the tapestry rod to enter the pocket
and keep it covered neatly. The lining which is extended, is a plain cloth after
the work area of the tapestry and resulting in the increase in the size of the
tapestry by 2-3" more. You can opt for the sub options. (a) Pockets
on all 4 sides. [Exra cost: US$3.50 per tapestry] (b) Pocket on any
one Longer side. [Exra cost: US$2.50 per tapestry] (c) Pocket on
any one Shorter side. [Exra cost: US$2.50 per tapestry] (d) Pockets
on 2 opposite Longer Sides. [Exra cost: US$3.00 per tapestry] (e) Pockets
on 2 opposite Shorter Sides. [Exra cost: US$3.00 per tapestry] | 3.
Brocade border rod insert pocket extension: In this case the rod pocket created
with the extended lining cloth is covered by stiching over a decorative and matching
new or vintage border so that there is no plain lining at the edges of the tapestry.
The end product hanging on the tapestry rod reveals the rod entering into the
brocade border pocket. The brocade border pocket is again in addition to the default
size of the tapestry you have ordered. The suboptions you can choose here are: (a)
Pockets on all 4 sides. [Exra cost: US$4.50 per tapestry] (b)
Pocket on any one Longer side. [Exra cost: US$3.00 per tapestry] (c)
Pocket on any one Shorter side. [Exra cost: US$3.00 per tapestry] (d)
Pockets on 2 opposite Longer Sides. [Exra cost: US$4.00 per tapestry] (e)
Pockets on 2 opposite Shorter Sides. [Exra cost: US$3.50 per tapestry] | 4.
Rod insert pocket under the work area: In this case the rod pocket is created
behind the edges of the tapestry itself without extending the size of the tapestry
or adding any extra lining or brocade border. The end result is the tapestry size
what is supplied in the default size only. The tapestry will look alike the one
provided by default if looked from front. However the customization can be seen
on the reverse of the tapestry and the rod pocket made can be of the same lining
cloth or not. Over here also you can have the following sub options. (a)
Pockets on all 4 sides. [Exra cost: US$3.00 per tapestry] (b)
Pocket on any one Longer side. [Exra cost: US$1.00 per tapestry] (c)
Pocket on any one Shorter side. [Exra cost: US$1.00 per tapestry] (d)
Pockets on 2 opposite Longer Sides. [Exra cost: US$2.00 per tapestry] (e)
Pockets on 2 opposite Shorter Sides. [Exra cost: US$2.00 per tapestry] | 5.
Self supporting tapestries: Ready to hang on a nail or hook on the wall
these tapestries are provided with 2 wooden rods (1 up and 1 down) included and
inserted in the rod pockets on 2 shorter sides after creating the rod pockets
for the insertion of the wooden rods. Then a thick black thread is tied on the
2 ends of any one wooden rod which is coming out of the rod pocket. The thread
can then be used to hang the tapestry on a nail or a hook on a wall. The suboptions
to choose here are: (a) Rods on
2 opposite Longer Sides. [Exra cost varies as per the size of tapestry. For
a 40"x60" tapestry: US$6.00 per tapestry] (b)
Rods on 2 opposite Shorter Sides. [Exra cost varies as per the size of
tapestry. For a 40"x60" tapestry: US$5.00 per tapestry] | 6.
Without lining: At times, based on the type of work. You may want to see
the work impressions on the reverse sides of the tapestry. The kind of work it
reflects on the reverse side needs the linings to be removed and only the pipings
to be stiched alongside the edges of the tapestries. [Exra cost: US$1.00 per tapestry] |
Please
mention the customization by their nos. like 2(b) or 6. Tapestry
Wall hangings: Index page with all samples | Description/
About Tapestry Wall hangings Tapestry wall hangings-
Style Nos. in this category:
#FW1,
#FW2,
#FW3,
#FW4,
#FW6,
#FW8,
#FW9,
#FW10,
#FW11,
#FW29,
#FW31,
#FW34,
#FW45,
#FW59,
#FW60,
#FW61,
#FW62,
#FW64,
#FW66,
#FW68,
#FW77,
#FW80,
#FW90,
#FW91,
#FW92,
#FW93,
#FW94,
#FW95,
#FW96,
#FW97,
#FW98,
#FW99,
#FW100,
#FW101,
#FW105,
#fw106,
#fw110
|
